Using the Stainless Rocket with 25mm ducting as a 'wand' for air
flow tracing applications
Made in Britain
portable, stainless steel
machine specifically designed for clean room air flow testing.
Easy to use
Compact and robust
Continuous output capable (on mains power)
Variable, controllable output (0 -> maximum)
Extremely persistent water-based
Non-toxic, thick, dry, white smoke
Stainless steel, designed for cleanrooms
Particle size 0.2 - 0.3 micron, mass median
diameter - the smallest particle size of any smoke machines
The Stainless Cleanroom Rocket Fogger is the perfect instrument to
easily, cleanly and safely visualise air flow movement, patterns
and extraction / air change times in laboratories and clean
The artificial smoke produced from the Stainless Cleanroom Rocket is extremely persistent with a particle size of just
0.2 microns, (mass median diameter). The fluid used to produce
the non-toxic smoke is a combination of purified water and
pharmaceutical grade glycerine (CAS 56-81-5 / EINECS 200-289-5).
The Cleanroom Rocket Fogger can also make a considerable volume
of smoke without mains power after an initial heat-up period.
the unit off-mains power using the retained energy within
the high mass heat exchanger, allowing you to carry the generator
as required, without a trailing electrical lead. After being
on mains for around 15 minutes, the unit will generate large
for around 2 minutes whilst off power, or smaller volumes
for even longer.
Connected to the mains, the unit can operate
continuously at full output at any smoke output volume
Specifically designed for use in cleanroom and
pharmaceutical cleanroom environments, as well as analytical
laboratories, the Cleanroom Rocket is simple to use and reliable.
The artificial smoke from the Cleanroom Rocket can
be ducted using optional ducting adaptors (to suit 25, 50
and 75mm ducting) enabling the smoke to be introduced into
a restricted area, duct or fume cupboard to visualise air
flow patterns and areas of stagnancy very easily, safely and
Smoke fluid from pressurised aerosol canisters
makes the unit very easy to use. Each aerosol will allow approx
15 minutes of smoke production at full output, or 30 minutes
at 50% output, and so on. The aerosol re-seals after each
use - it does not have to be used all at once.
Precision machined heat
exchanger, guaranteed for life!
Utilises aerosol canisters for safe, convenient
Compact size, lightweight and portable
Available for 230v or 110v
(please specify when ordering)
In stainless steel for cleanroom applications
General Specification (approx.)
Stainless Cleanroom Rocket Fogger
Size (cm) (L x W x H)
33 x 15 x 19cm
Heat exchanger wattage
(110v, 50-450Hz optional)
Warm up time from cold
Total smoke output dDuration of aerosol
14 minutes at maximum output (fully adjustable output volume)
0 - 125 m3/min @ 1.5m visibility
Consistently 0.2 - 0.3 micron, mass median
smoke fluid aerosol for Cleanroom Rocket
(persistent smoke) for Cleanroom Rocket
(Supplied in boxes of 10)
Overseas Use - non-pressurised fluid canisters
Overseas shipping costs
are generally reduced by ordering refillable canister(s) and containers
of smoke fluid instead of the above pre-pressurised aerosols.
aerosol (supplied singly) Fill with fluid
(below) and pressurise to 100PSI / 7bar with a hand pump, airline
or inert gas supply. Can be used 25 times + if used with care.
5 litres smoke fluid for use with refillable
Will fill the refillable aerosol approx. 14 times.
High pressure shock pump - with
gauge, used to pressurise the refillable aerosol (above) to
100 PSI. Small and portable, requires approx. 200 actions to
pressurise canister. Photo below shows
pump next to refillable aerosol.
Premium PELI Transport Case for
Stainless Cleanroom Rocket smoke machine.
with custom foam cut-out to fit the Cleanroom Rocket machine, power
lead, ducting adaptor, 25mm ducting hose and 2 aerosols. Colour: orange.
IP67 certified for military, broadcast, marine, photography,
industrial use. Air tight, corrosion proof, water tight, shock
proof, sand and dust proof.
A ducting adaptor easily
attaches to the front of the machine to allow secure
connection of ducting hose to allow smoke to be positioned
precisely, in hard to reach places or inside fume cupboards,
All our ducting hoses are internally lined to be smooth
thereby reducing frictional losses and particle impaction.
25mm diameter ducting adaptor Easily
attaches to the front of the Cleanroom Rocket and secures the ducting
hose in position.
25mm silicon lined flexible ducting
x 2 metre length
See photo at top. Stays rigid - ideal for clearance
and air flow tests to use as a smoke 'wand'.
25mm silicon lined flexible ducting
x 4 metre length As above, but a 4 metre length
If you do not require a stainless steel finish, the Stainless Cleanroom Rocket is available as the Pea
Soup Rocket, which produces just the same high quality
smoke, but is also available with a 5 metre wired remote control
option and in a Turbo (2.2kW) high output version, yet is still
compact (only 5cm longer and 1.5cm taller than the Stainless Rocket).
It can also be used off-power for up to 2 minutes just the same
as the Cleanroom Rocket.
The Pea Soup Micro
Rocket is a quick dispersing battery powered smoke machine ideal for flow visualisation and LEV work.
Click on the image below to find out more: