This 650 watt smoke generator is
made for smaller stages and clubs.
Equipped with all features and the usual reliability of the
other units in the Viper range, the Viper S is an inexpensive
alternative to the NT or 2.6 machines.
- Power: 650W
- Warm up time: 7 minutes
- Fluid consumption at 100% output: 60ml per
- Fluid consumption at 25% continuous output:
15ml per minute
- Fluid tank capacity: 0.75 litre
- Fog output projection: 8 metres max.
- Continuous output at 25%
- Dimensions: 35cm long x 18cm wide x 19cm
- Weight without fluid: 5.4kg
The VIPER S can be controlled via
DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control
The machine can also be controlled with analog
(0 - 10 V) via a lighting desk or via XLR-remote (option).
This connection is via 3 pin XLR plugs.
A stand-alone-mode is also possible. The adjustments
are done directly at the machine. A short press at the start
button makes the machine run. Therefore a permanent pressing
of the start button is unnecessary.
A radio remote is also available as an option.
With the internal timer the fog time can be
exactly adjusted in seconds, the wait time in minutes and
the output in %.
The control panel with LED-display, simple symbols
allow for easy operation. It also protects the control buttons
Digital technology makes fine adjustment of
the pump possible. In steps of 1% the output can be adjusted
from 0 - 99%. Thus, any desired effect from a tiny fog-cloud
to the thickest fog can be produced. This enables the viper
nt to be used in both small and large locations.