Features:
- 3-digit LED user interface
- This Hazer comes as standard with on-board
3- and 5-pin DMX – two channels (Fan speed and Fog
output).
- V.G.A system (Variable Geometry Airflow)
allows you to set the angle of the output.
- High velocity radial blower.
- This high precision hazer uses state-of-the-art
digital technology.
- Specially designed heat exchanger has reduced
heat up time to less than 2 minutes.
- Designed for continuous operation.
- Fluid consumption at max output: 410
ml/hour
DIRECT THERMAL PROTECTION DEVICE (DTPD)
This small yet crucial component is the last line of defence
against catastrophic failure. This machine's DTPD is made from a solid
ceramic composite. This guarantees extremely precise overheat
monitoring and is unaffected by ambient temperature changes.
Electronic Low Fluid Cut-off System
This technology is fitted to all machines designed for continuous
operation. To eliminate the risk of running dry and burning
out the pump, this unique electronic sensing system will automatically
shut-off the machine, protecting all major components.
Sequential Pump System
Because haze generators generally run continuously, heavy
demands are placed on the pump. Jem´s Sequential Pump
System increases the life of the machine through a dedicated
´haze´ pump circuit which pulses the pump at full
output thus producing the ideal output and keeping the pump
cool.
Soft Start Electronics
The 'crack' created during the initial burst of smoke is caused
by the pump pressure overcoming the incredible back pressure
of the heat exchanger. The unique Soft Start Electronics in this machine
gradually powers the pump, eliminating this crack and ensuring
a quieter and smoother operational level following initial
start up.
On-Board LED display
This 3 digit LED user interface allows you full and user-friendly
access to the different functionalities of the unit.
On-Board DMX
With onboard DMX you will have access to the machine from
any DMX controller or desk.
Digital Link
Whether you´ve run out of DMX channels or simply want
to link two smoke/haze machines together and operate them
from a single remote, Jem’s link facility is the solution.
This feature even allows multi-machine connection, making
operation a simple one-finger action.
Fluid Container (2.5 litre)
All Jem smoke, haze and heavy fog machines are designed to
carry removable fluid containers of varying sizes depending
on the model´s application. The removable container
makes for quicker refills and protects the machine from damage
through spillage in transit.
Fluid Container (1 litre)
All Jem smoke, haze and heavy fog machines are designed to
carry removable fluid containers of varying sizes depending
on the model's application. The removable container makes
for quicker refills and protects the machine from damage through
spillage in transit.
Heat Exchangers (900W)
All Jem heat exchangers are designed for high efficiency performance.
Only the purest grade LM24 aluminium is used in the production
process which eliminates the risk of porosity (pockets of
gas within the casting which can cause heater failure). All
heat exchangers contain cuprous helicoils of at least 2.8
metres in length, ensuring a continuous flow of pure, dry,
white smoke.
User
manual
|
Watch a video of this hazer in action
(4.6Mb)
|
DISCONTINUED |