There are a wide array of accessories available for the Model 1600 that enhance its flexibility from the timed Super Remote to a DMX Interface. In addition, by using the new Rosco Coldflow or the Chiller Module with Rosco Stage & Studio Fluid, low-lying fog can be achieved. This is a more economical way of attaining this popular effect without the messiness of dropping dry ice in hot water.

The Model 1600 also offers an air input that allows effects to be created and the machine to be cleaned easily and quickly. (Clogged heat exchangers are the most common form of machine malfunction. Using compressed air helps keep the heat exchanger clean.)

A litre bottle of Rosco Fog Fluid sits neatly encased in a well at the rear of the machine. Fluid is fed to the machine via the fluid inlet that is mounted next to the well on the top of the machine.

Power requirements:

120 volts, 50/60 Hz, 11.75 Amps.

220/240 volts, 50/60 Hz, 7.5 Amps.

100 volts, 50/60 Hz, 13.5 Amps.

Dimensions: 18.75" x 8.25" x 7.25" (48cm x 21cm x 18.5cm).

Weight: 21 lbs. (9.45 kg).

Warm-up time: Approximately 5 minutes.

Maximum fluid consumption: 2.5 litres per hour. 63cc per minute.

Particle size: 0.25 - 60 microns.

Standard remote: 24 volts DC system. Fog switch, fog light and ready light. Cord - 15 feet (4.57m).

Power cord: 7.5 feet (2.25m) EAC Type female plug.

The Model 1600 is UL and CUL listed, is CE compliant and carried a limited 1 year warranty.